Zestaw narzędzi, zakres podstawowy VAS 275 001 ASE27500101000

Module 1 (101 parts):
- Reversible ratchet (1/4”) 130 mm
- Spinner handle (1/4”) 135 mm
- Extension (1/4”"): 50 mm, 100 mm, 150 mm
- Universal joint (1/4")
- Socket wrench bit, hex (1/4”) WAF 4-14
- Screwdriver bit (1/4”): Internal hex, WAF 3-6; 1x5,5; PH1; PH2; T6-T9
- Torx screw driver bit (1/4”): E4-E8; T10-T30
- Adapter: 1/4” to 3/8”, 3/8” to 1/2”, 3/8” to 1/4”
- Socket wrench bit, hex (1/2”) WAF 4-32
- Torx screw driver bit (1/2”): E10-E20
- Socket wrench bit, force double hex (1/2”): WAF 32; 36
- Socket wrench bit, double hex, short (1/2”): WAF8-32
– Socket wrench bit, double hex, long (1/2”): WAF 17; 19
- T-bar (1/2”) 300 mm
- Reversible ratchet (1/2”) 240 mm
- Swivel extension (1/2”): 50 mm; 125 mm; 250 mm
- Universal joint (1/2”): 70 mm
- Adapter: 1/2” to 3/4”; 1/2” to 3/8”; 3/4” to 1/2”; internal square 1/4”; to internal hex 1/4”;
- Torx screw driver bit (1/2”): T25-T60
Module 2 (50 parts)
- Offset screwdriver with ball head, long: WAF1,5-10
- Torx offset screwdriver, long: T9-T40
- Screwdriver bit, internal hex (1/2”): WAF 5-20
- Screwdriver bit, internal hex with ball head, long (1/2”): WAF 6-10
- Screwdriver bit, multi-point socket head bolt (1/2”): WAF5-19
- Screwdriver bit, multi-point socket head bolt, long (1/2”): WAF8–14
- Screwdriver with lug strap: 5.5x1.3; 6.5x1.4; 8.0x1.6 mm; PH1; PH2
Module 3 (22 parts)
- Short screwdriver: PH2; 5.5x1 mm
- Slotted screwdriver: 3.0x0.8; 4x0.9; 5.5x1.1; 6.5x1.3; 8x1.3; 10x1.6; 12x2 mm
- Cross-headed screwdriver: PH1-PH3
- Torx screw driver: T6-T30
Module 4 (33 parts)
- Ratchet ring open-end spanner: WAF8-19
- Ring open-end spanner: WAF6-24
- Double ring spanner: WAF8-22
- Moving open double ring spanner: WAF10x11
Module 5 (9 parts)
- Ring open-end spanner: WAF27–32
- Double ring spanner: WAF24–32
- Tyre assembly lever 500 mm
- Swivel extension 500 mm (1/2”)
- Sliding piece with rotary rod 500 mm (3/4”)
- Adapter 3/8” to 1/2”
Module 6 (9 parts)
- Universal grip pliers 230 mm
- Water pump pliers 250 mm
- High-leverage diagonal cutter 180 mm
- Flat-nose pliers 165 mm
- Set of pliers for retaining rings 19-60 mm
- Pliers combination 170 mm
Module 7 (18 parts)
- Tyre tread depth gauge
- Flat chisel 190 mm, 220 mm
- Punch
- Various roll-pin drifts 150-220 mm
- Scraper
- Magnetic detector with flexible shaft
- Locksmith’s hammer with fibreglass handle 400 g
- Plastic mallet
- Tape measure, 5 m
- Feeler gauge 0.04-1.0 mm
- Folding knife
- Steel wire brush
- Telescopic mirror set

Soft foam insert (W × H × D): 575 × 435 × 50 mm